Air Center, Inc.
270 Monroe Ave.
Kenilworth, NJ 07033
(908) 858-5788
airinfo@aircenter-nj.com

Air Center, Inc.
6373 Winside Drive
Bethlehem, PA 18017 (484) 626-0203
Fax (610) 837-6100

Secotec Refrigerated Dryers

Specifications
Models: TA5 up to TE141
Flow rate: 20-520 cfm at 100 psig

Compressed air contains water vapor. As this air travels through compressed air piping it cools and the vapor condenses into liquid condensate. This condensate increases maintenance requirements and affects product quality.

Kaeser Secotec® dryers condense and remove moisture before it attacks your system. These reliable dryers feature the energy saving Secotec®cycling control. Secotec® dryers operate the refrigerant compressor only when necessary by using a thermal storage medium. The refrigerant compressor cools the medium to a predetermined temperature and then cuts off, allowing the medium to cool the air and condense the water vapor.

Important features and advantages:
- Highly efficient Secotec® cycling control with high thermal storage capacity
- Minimal pressure drop and no prefilter required
- Highly effective, stainless steel condensate separator
- "No-loss" electronic condensate drain removes condensate
- Quick access to all components for easy, low-cost maintenance
- Durable, industrial-quality control cabinet
- Easy to read and reliable control panel

Kaeser also offers a complete line of high temperature refrigerated dryers, high pressure refrigerated dryers and small commercial duty dryers. Please contact us for details and specifications.

Energy-Saving Refrigerated Dryers

Specifications
Dual Control
Models: TG 241 to TI 901
Capacities: 800 to 3000 scfm @ 100 psig

Demand Manager
Models: TG 171E to TI 901E
Capacities: 600 to 3000 scfm @ 100 psig

A choice of two great controls

Kaeser's Energy-saving Dryer series offers a choice of two control options to suit your application. The Dual Control models are perfect for systems with varying air demands, while the Demand Manager models efficiently handle systems with a constant air demand.

Important features and advantages:
- Low pressure drop, non-fouling heat exchanger
- Low pressure drop filtered separator with microprocessor controlled filter monitor removes liquids and particulates to 3 microns
- "No-loss" electronic Eco-Drain for reliable condensate removal
- On/off load digital scroll refrigeration compressor (Dual Control models only).
- Hot gas bypass control
- State-of-the-art control system with timed auto-start and stop
- Optional cold coalescing oil removal filter eliminates oil aerosols to 0.008 ppm

Heatless Regenerated Desiccant Dryers

Specifications
Model: KAD series
Capacities: 40 to 5400 scfm @100 psig
Pressure dewpoint: to -100 °F

Kaeser Adsorptive Desiccant dryers (KAD Series) employ a heatless regenerative design to produce pressure dewpoints as low as -100°F. Solid-state controls with adjustable cycle timers allow KAD Series dryers to be easily adapted to user requirements. The optional purge saver control dramatically increases efficiency at reduced flows, and includes active tower lights and a switching failure alarm.

KAD dryers are ideally suited for moisture sensitive applications such as electronics and pharmaceutical manufacturing, food processing and brewing.

Important features and advantages:
- Eight settings available to reduce regeneration requirements by matching air flow to purge flow
- Left and right tower pressure gauges, as well as purge pressure gauge
- Moisture indicator signals elevated dew point
- Capacity allows 100% continuous loading and minimum demand for purge air
- Inlet port is easily adjusted to suit varying pressure
- Inlet and outlet filters are standard

Wall Mounted Desiccant Dryer

Specifications
Model: KADW Series
Capacities: 5 to 25 scfm @100 psig

Kaeser Adsorptive Desiccant Wall-mounted dryers (KADW Series) are fully enclosed in a ready-to-install cabinet, and feature a control panel on the exterior for easy monitoring. KADWs are delivered completely assembled, piped and wired, fully charged with desiccant. Units can be mounted virtually anywhere to conserve floor space. Filtration packages are also available.